Forklift Training Programs Mississauga

Forklift Training Programs Mississauga - If you are searching for work as a forklift operator, our regulatory-compliant lift truck training programs provide excellent instruction in various styles and types of lift trucks, classes on pre-shift check, fuel types and dealing with fuels, and safe utilization of a lift truck. Hands-on, practical training assists individuals participating in acquiring basic operational skills. Course content consists of existing rules governing the utilization of forklifts. Our proven forklift courses are designed to provide training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

How to Safely Handle Loads

When the lift truck is in operation, do not raise or lower the forks. Loads should not extend higher than the backrest. This is due to the risk of the load sliding back towards the operator. Check for overhead obstructions and make sure there is enough clearance prior to raising a load. Stay away from overhead power lines. When the load is raised straight up, tilt it back slightly.

When the load is lifted the lift truck would be less stable. Make sure that no pedestrians cross under the elevated fork. The operator should never leave the lift truck when the load is lifted.

The forks must be level when handling pallets, and high enough to extend all the way into and under the load. The fork's width must provide even distribution of weight.

Chock the wheels and set the brakes before loading and unloading the truck. The floors should be strong enough to support the combined weight of the forklift and its load. Fixed jacks could be installed to be able to support a semi-trailer that is not coupled to a tractor. The entrance door height should clear the height of the forklift by a minimum of 5 cm. Edges of rail cars, ramps and docks should be marked and avoid them.

Do not stay in a lift truck for a long time without correct ventilation. The interior of the truck should be well lighted and free of loose objects, obstructions and trash. Inspect for holes in the floor. The installation of material that are non-slip on the floor will help prevent slipping. Clear any obstacles from docks and dockplates and ensure surfaces are not wet or oily.

Lift trucks must not be used to push or tow other forklifts.

Click to Download the pdf